B1285 ProTalk Link

Combining many of the features found in other ProTalk models, the ProTalk Link is our most versatile and flexible alarm reporting unit to-date. Each ProTalk Link can be easily tailored, with the 6 available plug-on modules, to meet a wide variety of alarm monitoring applications.

Highlights

  • Two communication modules enable you to send critical alarm messages over any combination of mobile radio, telephone, cellular (LTE, HSPA), paging or electronically in the form of SMS text or Email
  • Three expansion modules enable you to expand the ProTalk Link to over 500 alarm points
  • Monitor Modbus, Allen Bradley, and EtherNet/IP PLC's via RS232, RS485 and TCP/IP
  • Local and Internet real-time alarm viewing

Request Pricing
M1 Module

One M1 Module is required for each Link System and is the master control unit.

Model #: B1285-M1


General Features

Display

  • Indicator LEDs and connector markings

Inputs and Outputs

  • 2 dedicated inputs for Power Fail Alarm and Acknowledge Alarms
  • 2 Form C relays, 1 A at 30 VDC
  • Plug-in screw terminal block accepts AWG 26 to 12 wire

Program Ports

  • DB9, RS232 serial - used for programming, code updating and monitoring unit status
  • USB - Equivalent functions as DB9
  • Tel - RJ11 connects to DTMF capable phone for voice recording and programming

Voice Storage

  • Flash memory, 60 minute voice storage capacity with up to 521 user recordable voices

Specifications

Power

  • +10 VDC to +30 VDC, 150 mA at 12 VDC, 100 mA at 24 VDC with all indicators on

Environment

  • -40°C to +60°C, 0 to 95% humidity, non-condensing

Physical

  • 8.9" x 2.42" x 4.32"

Rating

  • CSA/UL Safety Approvals
Nema NEMA Enclosure
  • NEMA 4X rating
  • Emergency battery backup (optional B1252)
  • Programming telephone handset
  • Model # NEMA
B1252 Battery Backup Power Supply
  • DC power supply with battery backup
  • Integral battery charger automatically transfers to the battery when the AC power fails
  • Provides an AC power failure alarm
  • Model # B1252
bracket Rack Mount Brackets
  • Model # RME 1285
Communication Modules:
T1 Module

Model #: B1285-T1

  • Telephone line(RJ11) and Radio port connection
  • Announce alarms over any combination of telephone,radio or PA (public address) system
  • Can be used in conjunction with a cellular module as a backup callout
  • Modem can be used for remote programming with PC software

General Features

Display

  • Indicator LEDs and connector markings

Inputs and Outputs

  • 8 ground closure operation inputs
  • Inputs programmable as Digital, Totalizer, Interval Timer, or Accumulator alarm types
  • 4 total Outputs, Form C relay. 2 A at 30 VDC rated
  • Plug-in screw terminal block accepts AWG 26 to 12 wire

Ports

  • Radio: TX audio: 600 Ω single ended capacitively coupled
  • Radio: RX audio: 10 kΩ single ended capacitively coupled
  • Telephone: RJ11, Dial or Pulse. POTS interface. Modem connectivity at 14,400bps

Specifications

Power

  • +10 VDC to +30VDC, 150 mA at 12 VDC, 100 mA at 24 VDC with all indicators on

Environment

  • -40°C to +60°C, 0 to 95% humidity, non-condensing

Physical

  • 8.9" x 2.42" x 4.32"

Rating

  • CSA/UL Safety Approvals
rj11

Telephone Line Transient Protector

  • Protect your equipment
  • Model # LP TELCO
W4 Module

Model #: B1285-W4

  • Provides a cellular based phone connection via integrated LTE/HSPA module
  • Send voice alarms, SMS text, and Email messages
  • New Email reporting feature
  • Can be used in conjunction with a Telephone Module for a backup callout

General Features

Display

  • Indicator LEDs and connector markings

Inputs and Outputs

  • 8 ground closure operation inputs
  • Inputs programmable as Digital, Totalizer, Interval Timer, or Accumulator alarm types
  • 4 total Outputs, Form C relay. 2 A at 30 VDC rated
  • Plug-in screw terminal block accepts AWG 26 to 12 wire

Ports

  • Antenna:  SMA female. 50 ohm

Specifications

Power

  • +10 VDC to +30 VDC, 150mA at 12 VDC, 100 mA at 24 VDC with all indicators on

Power When Transmitting

  • add 500 mA at 12 VDC or 300 mA at 24 VDC

Environment

  • -40°C to +60°C, 0 to 95% humidity, non-condensing

Physical

  • 8.9" x 2.42" x 4.32"

Rating

  • CSA/UL Safety Approvals

SIM Card

  • Mini-SIM, 25.00mm x 15.00mm x 0.76mm
Wideband LP Dual Band Antenna
  • High gain antenna ideal for poor coverage areas
  • Consistent 9dBi gain across all frequencies
  • DC grounded for lightning protection
  • Model # ANT DB WIDEBAND
Phantom Phantom Dual Band Antenna
  • Ideally suited for NEMA enclosures or cabinets
  • 3dB MEG
  • DC grounded for lightning protection
  • Model # ANT DB PHANTOM
Omni Dual Band Omni-Directional Antenna
  • Ideal for outdoor applications with good cellular coverage
  • Applicable for both 3G and 4G solutions
  • Mast mounting hardware included
  • Model # ANT OMNI
Lightning Protector

Coaxial Lightning Protector

  • Model # LP Coax
RG-213-LP

35' Lightning Protector to Antenna N to N Cable

  • Model # CC TX LINE N TO N 35FT
RG-213-LP 6' B1285-W To Lightning Protector SMA to N Cable
  • Model # CC LMR195 SMA TO N 6FT
Expansion Modules:
P2 Module

Model #: B1285-P2

  • Connect with PLC's using Modbus, Allen-Bradley and EtherNet/IP protocols
  • Monitor up to 512 points
  • Run multiple protocols simultaneously

General Features

Display

  • Indicator LEDs and connector markings

Protocols

  • Modbus RTU; master or slave (RS232 or RS485)
  • Modbus TCP/IP; master or slave
  • Allen Bradley DF1; Master (point to point) to a PLC5 or SLC500 series device
  • EtherNet/IP; Remote IO Adapter

Ports

  • RS232 (DTE) DB9
  • RS485
  • Ethernet

Specifications

Power

  • +10 VDC to +30 VDC, 350 mA @ 10 VDC, with all indicators on

Environment

  • -40°C to +60°C, 0 to 95% humidity, non-condensing

Physical

  • 8.9" x 2.42" x 4.32"

Rating

  • CSA/UL Safety Approvals
A1 Module

Model #: B1285-A1


General Features

Display

  • Indicator LEDs and connector markings

Inputs

  • 8 current loop inputs (4-20 mA).  Impedance:  100 Ω floating. Max common voltage:  +35 VDC.
  • 8 voltage inputs (5-30 VDC). impedance: 100 kΩ to ground.  Max input voltage:  +35 VDC
  • Plug-in screw terminal block accepts AWG 26 to 12 wire

Specifications

Power

  • +10 VDC to +30 VDC, 150 mA at 12 VDC, 100 mA at 24 VDC with all indicators on

Environment

  • -40°C to +60°C, 0 to 95% humidity, non-condensing

Physical

  • 8.9" x 2.42" x 4.32"

Rating

  • CSA/UL Safety Approvals
D1 Module

Model #: B1285-D1


General Features

Display

  • Indicator LEDs and connector markings

Inputs

  • 16 digital inputs using ground closures or voltage closures ranging from 5 to 30 VDC
  • 4 reset inputs used to reset totalizer or accumulator status
  • Plug-in screw terminal block accepts AWG 26 to 12 wire

Specifications

Power

  • +10 VDC to +30 VDC, 150 mA at 12 VDC, 100 mA at 24 VDC with all indicators on

Environment

  • -40°C to +60°C, 0 to 95% humidity, non-condensing

Physical

  • 8.9" x 2.42" x 4.32"

Rating

  • CSA/UL Safety Approvals
Nema NEMA Enclosure
  • NEMA 4X rating
  • Emergency battery backup (optional B1252)
  • Programming telephone handset
  • Model # NEMA
B1252 Battery Backup Power Supply
  • DC power supply with battery backup
  • Integral battery charger automatically transfers to the battery when the AC power fails
  • Provides an AC power failure alarm
  • Model # B1252
bracket Rack Mount Brackets
  • Model # RME 1285
rj11

Telephone Line Transient Protector

  • Protect your equipment
  • Model # LP TELCO
Wideband LP Dual Band Antenna
  • High gain antenna ideal for poor coverage areas
  • Consistent 9dBi gain across all frequencies
  • DC grounded for lightning protection
  • Model # ANT DB WIDEBAND
Phantom Phantom Dual Band Antenna
  • Ideally suited for NEMA enclosures or cabinets
  • 3dB MEG
  • DC grounded for lightning protection
  • Model # ANT DB PHANTOM
Omni Dual Band Omni-Directional Antenna
  • Ideal for outdoor applications with good cellular coverage
  • Applicable for both 3G and 4G solutions
  • Mast mounting hardware included
  • Model # ANT OMNI
Lightning Protector

Coaxial Lightning Protector

  • Model # LP Coax
RG-213-LP

35' Lightning Protector to Antenna N to N Cable

  • Model # CC TX LINE N TO N 35FT
RG-213-LP 6' B1285-W To Lightning Protector SMA to N Cable
  • Model # CC LMR195 SMA TO N 6FT